Cable Tie Bases & Mounts
Cable Tie Bases
- Self-adhesive Nylon 6.6 cable tie bases.
- Entry from four sides to facilitate error-free mounting.
- To ensure complete security where excessive stress or vibration is likely to occur, a screw mounting hole is provided on the HFC 2/4.
- Available in either natural or black colour.
- Packed in 100's.
| PARTEX PART NUMBER | LENGTH mm | WIDTH mm | ENTRY | MAXIMUM TIE WIDTH mm |
|---|---|---|---|---|
| HFC 1/4 | 20 | 20 | 4 way | 4.0 |
| HFC 2/4 | 28 | 28 | 4 way | 5.0 |
Note: The adhesive backing used on our nylon cable tie bases has been tested in the most varied conditions and extreme temperatures. We can therefore confidently recommend their use on most smooth, dry, clean and grease free surfaces. Recommended operating temperature -20°C to +60°C, but it is advised that the bases should not be applied when temperatures are very low.
Saddle Type Mounts
- Screw mountable saddle type cable tie mounts.
- Material: Nylon 6.6
- Continuous working temperature: -40°C to +85°C
- Available in Black or Natural. Please specify colour when ordering.
- Supplied in bags of 100 pieces.
| PARTEX PART NUMBER |
FOR USE WITH CABLE TIES UP TO mm WIDE |
SIZE OF SCREW |
|---|---|---|
| SM 2 | 4.8 | M4 |
| SM 3 | 9.0 | M5 |
