Jump to Navigation

Standard Crimp Tools

CT1 crimp tool

CT1

  • NEW! Economy crimp tool for red, blue and yellow pre-insulated terminals.
  • Crimps non-insulated terminals 0.75mm² to 6mm².
  • Strips wire 0.75mm² to 6mm².
  • Cuts bolts.
  • Integral wire cutter.
  • Length 215mm.
  • Weight 0.25kg.
CT15 crimping tool

CT15

  • Ratchet crimping tool for red, blue and yellow pre-insulated terminals.
  • Adjustable tensioner.
  • Replaceable jaws.
  • Indents on jaws identify which jaw has been used.
  • Ergonomically designed handles reduce operator fatigue.
  • Length 225mm.
  • Weight 0.51kg.
UCT15 crimping tool

UCT15

  • Ratchet crimping tool for un-insulated terminals 0.5mm² to 6.0mm².
  • Adjustable tensioner.
  • Replaceable jaws.
  • Ergonomically designed handles reduce operator fatigue.
  • Length 225mm.
  • Weight 0.51kg.
CT1.5-16 crimping tool

CT1.5-16

  • Ratchet crimping tool for smaller copper tube terminals.
  • Suitable for volume use on terminals up to 6.0mm² and occasional use on terminals up to 16mm².
  • For volume use of 10mm² and 16mm² terminals use the Partex CT10-16 crimp tool.
  • Adjustable tensioner.
  • Replaceable jaws.
  • Ergonomically designed handles reduce operator fatigue.
  • Length 225mm.
  • Weight 0.51kg.
CEFT1, CEFT2 and CEFT3 crimping tools

CEFT1, CEFT2 and CEFT3

  • CEFT1 - for cord end ferrules 0.5mm² to 6.0mm².
  • CEFT2 - for cord end ferrules 4mm² to 16mm².
  • CEFT3 - for cord end ferrules 16mm² to 35mm².
  • Adjustable tensioner.
  • Replaceable jaws.
  • Ergonomically designed handles reduce operator fatigue.
  • Polished jaws mean that ferrules release easily after crimping.
  • Length CEFT1 and CEFT2 205mm, CEFT3 226mm
  • Weight CEFT1 and CEFT2 0.39kg, CEFT3 0.54kg.
TCEFT1 crimping tool

TCEFT1

  • NEW! Ratchet crimping tool for twin cord end ferrules 0.5mm² to 6.0mm².
  • Adjustable tensioner.
  • Replaceable jaws.
  • Ergonomically designed handles reduce operator fatigue.
  • Polished jaws mean that ferrules release easily after crimping.
  • Length 225mm.
  • Weight 0.54kg.
CT10-16 crimping tool

CT10-16

  • Ratchet crimping tool specifically designed for crimping 10mm² and 16mm² copper tube terminals.
  • Ideal for IEE specification earthing bond work.
  • Adjustable tensioner.
  • Ergonomically designed handles reduce operator fatigue.
  • Length 242mm.
  • Weight 0.54kg.
CT Flag crimping tool

CT FLAG

  • Ratchet crimping tool for red and blue insulated flag terminals.
  • Adjustable tensioner.
  • Replaceable jaws.
  • Indents on jaws identify which jaw has been used.
  • Ergonomically designed handles reduce operator fatigue.
  • Length 242mm.
  • Weight 0.54kg.