Partex

SG - Standard grade heat shrink sleeves

Highly flexible heat shrink tubing with a shrink ratio of 2:1. Made of flexible polyolefin. Used for wire identification. Markers are supplied on a roll, in a flattened format, on a backing which can also be printed to aid sorting.

Product characteristics

  • Flame retardant
  • Self-extinguishing
  • Easy to apply
  • Form of a ladder
  • Available widths of 12.5 mm - 25 mm - 50 mm
  • Print is also possible on the foundation (above or below the marker)

Product properties

Shrink ratio
2:1
Continuous operating temperature
from -55 °C to 125 °C
Tensile strength (min.)
10.4 MPa
Elongation at break (min.)
250 %
Minimum shrink temp.
90 °C
Longitudinal change (max.)
-7 %
Material
Flexible polyolefin
Working Temperature
from -55 °C to 125 °C
Print
Thermal transfer
Package
Category
Standard colours
SG-024
Diameter after shrinking
1.2 mm
Diameter before shrinking
2.4 mm
SG-032
Diameter after shrinking
1.6 mm
Diameter before shrinking
3.2 mm
SG-048
Diameter after shrinking
2.4 mm
Diameter before shrinking
4.8 mm
SG-064
Diameter after shrinking
3.2 mm
Diameter before shrinking
6.4 mm
SG-095
Diameter after shrinking
4.75 mm
Diameter before shrinking
9.5 mm
SG-127
Diameter after shrinking
6.4 mm
Diameter before shrinking
12.7 mm
SG-180
Diameter after shrinking
9 mm
Diameter before shrinking
18 mm
SG-254
Diameter after shrinking
12.7 mm
Diameter before shrinking
25.4 mm
SG-381
Diameter after shrinking
19.1 mm
Diameter before shrinking
38.1 mm
SG-508
Diameter after shrinking
25.4 mm
Diameter before shrinking
50.8 mm

We use cookies to provide services at the highest level. Staying on the site means you agree to their recording or use. Learn more

Accept